Woodpiles

Jun. 19th, 2010 09:01 am
kevin_standlee: (Let's Split)
[personal profile] kevin_standlee
I'm leaving for California later today, and I'm rushing around this morning trying to get small things done here that didn't get done during the past three weeks and trying to pack up all of the equipment I brought up here with me plus the stuff I need to carry back from Oregon for eventual transport to Pasadena for Match Game SF and the Tonopah in 2012 Westercon bid. But I do have time to take stock of what I did accomplish in the wood-splitting department.


This is the maple that they dropped last year. Most of the pieces of the tree besides this huge gnarled piece (we'll have to use the chainsaw on that one; it won't split by hand) are hidden by the brush that grew up around them.


The poplar tree is in Lisa's father's front yard, and when he sits watching TV, he can look out the sliding-glass door and see this pile. The tree-removal people's equipment gouged a slight hole in the ground here, and I've been raking bits of debris from the wood-splitting operation into the hole to try and fill it in.


Finally there is the biggest of the three, that being the cedar tree. Of course, after the tree cutters came and went I found contacts for area mills that I might have at least been able to ask if they could use a large cedar tree. I suspect they would have said, "It's not worth the effort for a single tree," but now I'll never know since all we have is not-particularly-good firewood. Oh, there's lots of it, but cedar burns too hot, and poplar isn't great either.

Too bad that all of the troublesome trees (including that redwood that continues to pose a threat on the other side of the property but which will cost at least $5000 to remove) are mainly good for wood-working wood rather than firewood. We'll just have to make the best of things.

In the meantime, if any of my friends think they could make use of one of the log rounds for something productive, let me know and we can make arrangements for you to have it. There's still lots of unsplit wood here, and probably will be for a year or more, as I seem to be the only one with both the time and inclination to work on it, and I'm not here that much.

Date: 2010-06-19 05:03 pm (UTC)
howeird: (Default)
From: [personal profile] howeird
The minimum security correctional facility in Tonopah apparently has been closed. I suggest it as a venue for the con bid:
http://celebrifi.com/gossip/Escape-prompts-closure-of-prison-camp-in-Tonopah-2065264.html

http://www.doc.nv.gov/tcc/index.php?idnum=0
Edited Date: 2010-06-19 05:05 pm (UTC)

Date: 2010-06-19 06:29 pm (UTC)
From: [identity profile] kevin-standlee.livejournal.com
I shall pass this along to [livejournal.com profile] travelswithkuma, although I think he's pretty well set on using the Tonopah Station Ramada Hotel and the Tonopah Convention Center. The prison might make a good overflow facility or party hotel -- it being ten miles out in the desert, who's going to complain about the noise?
Edited Date: 2010-06-19 06:48 pm (UTC)

Date: 2010-06-19 05:35 pm (UTC)
From: [identity profile] yourbob.livejournal.com
You've just given me a wonderful idea. Thank you.

Are you trying for BASFA this week? I have a couple very small "of slight interest" items for you. (and I do mean slight, they can certainly wait another year, let alone two weeks)

Date: 2010-06-19 06:28 pm (UTC)
From: [identity profile] kevin-standlee.livejournal.com
I expect to be at BASFA this Monday, although I'm apt to be a bit tired out from the drive from Oregon.

Date: 2010-06-20 12:10 am (UTC)
From: [identity profile] johno.livejournal.com
If any of the rounds are > 18" in diameter & > 8" thick and have been drying for a year of more without cracking, I'd be interested.

Esp if from a hardwood tree.

Date: 2010-06-20 03:48 am (UTC)
From: [identity profile] kevin-standlee.livejournal.com
Well, the only thing that comes close would be a round from one of the maple trees, as they are more than a year old. However, they've not been completely under cover in a proper drying rack, but instead sitting under the bushes in the first photo. However, they do meet at least two of the other criteria: they are >18" in diameter and >8" thick (they're mostly about 16-28" thick. I do not know their condition regarding cracking, and probably won't find out until August, when I hope to be up there again.

Date: 2010-06-21 07:48 am (UTC)
From: [identity profile] johno.livejournal.com
Oh gheez, a 28" thick slice... That's a full sized drum.

This is for a long term project, so there is no rush.

If the rounds are not cracked, we can figure something out about transporting them down here.

If nothing else, if it's not to much effort, can you get them off the ground.

Thanks

Date: 2010-06-21 02:11 pm (UTC)
From: [identity profile] kevin-standlee.livejournal.com
Some of the pieces are 18" thick and maybe 36" in diameter. I'll be able to tell more the next time I get up there -- probably early August -- once we've cleared away the undergrowth to be able to get at the maple pieces. At that time we should be able to get a couple of the pieces off the ground and in a better place to dry.

October 2025

S M T W T F S
   1234
567891011
121314 15161718
19202122232425
262728293031 

Most Popular Tags

Style Credit

Expand Cut Tags

No cut tags
Page generated Mar. 13th, 2026 10:31 pm
Powered by Dreamwidth Studios